Brackets and mounts
Wall-Mounted Basket Holder
- Bounding box
- 153.0 × 151.0 × 150.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- August 12, 2026
Download
Free to download and use. See the terms.
The prompt
Create one printable wall-mounted basket holder for a rectangular device. Device dimensions: 140 mm wide 140 mm deep 250 mm high The device stands vertically inside the basket. Basket design: - inner width: 143 mm - inner depth: 143 mm - basket wall height: 60 mm - bottom thickness: 5 mm - side wall thickness: 4 mm - front wall height: 25 mm - right wall height: 60 mm - rear wall height: 60 mm - keep the top completely open LEFT SIDE: Create a vertical mounting plate attached to the entire left side of the basket. Mounting plate size: 180 mm high 150 mm deep 6 mm thick Add four screw holes through the mounting plate: diameter 5.5 mm two holes near the front two holes near the rear keep at least 20 mm distance from all plate edges Add two triangular reinforcement ribs between the basket bottom and the left mounting plate. The Mintion device must be removable vertically upwards. Keep the front mostly open for airflow. Keep the rear lower area accessible for the power cable. Do not add a lid. Do not add decorative elements. One single solid printable part. Units millimeters.
Parameters
| Name | Value | Range |
|---|---|---|
| Inner width | 143 mm | 100 – 300 |
| Inner depth | 143 mm | 100 – 300 |
| Wall height (right/rear) | 60 mm | 20 – 200 |
| Front wall height | 25 mm | 5 – 150 |
| Bottom thickness | 5 mm | 2 – 20 |
| Side wall thickness | 4 mm | 2 – 10 |
| Mounting plate height | 150 mm | 50 – 200 |
| Mounting plate depth | 150 mm | 50 – 200 |
| Mounting plate thickness | 6 mm | 3 – 20 |
| Rib base length | 10 mm | 3 – 30 |
| Rib vertical height | 15 mm | 5 – 50 |
| Rib thickness | 4 mm | 1 – 10 |
| Screw hole diameter | 5.5 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent