Brackets and mounts
Wall-Mount Device Holder 195x78x102
- Bounding box
- 236.5 × 88.5 × 67.2 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- September 12, 2026
Download
Free to download and use. See the terms.
The prompt
create a wall mounted shader for a device that have following demensions (L x W x H) 195 × 78 × 102 mm
Parameters
| Name | Value | Range |
|---|---|---|
| Device Length (L) | 195 mm | 50 – 600 |
| Device Width (W) | 78 mm | 20 – 400 |
| Device Height (H) | 102 mm | 20 – 400 |
| Fit Clearance | 1.5 mm | 0.2 – 5 |
| Wall / Lip Thickness | 4 mm | 2 – 10 |
| Bottom Shelf Thickness | 6 mm | 3 – 15 |
| Side Guide Height (x device H) | 0.6 x | 0.15 – 1.2 |
| Front Retaining Lip Height | 12 mm | 0 – 40 |
| Wall Plate Thickness | 5 mm | 3 – 15 |
| Mounting Ear Width | 16 mm | 8 – 40 |
| Screw Hole Dia (M4 clearance) | 4.5 mm | 2 – 10 |
| Screw Hole Inset | 20 mm | 8 – 60 |
| Plate Corner Radius | 4 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent