Brackets and mounts
VTOL Part 2 - Wings and VTOL Motor Arms
- Bounding box
- 2438.1 × 1180 × 143 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Printable 2438 mm wing in 10 spar-tube segments (NACA 2412), boom clamps and 4 VTOL motor mounts on an 850 x 850 mm layout, plus reference carbon tubes, motors and props for the quadplane VTOL.
Parameters
| Name | Value | Range |
|---|---|---|
| Fuselage width, must match Part 1 | 200 mm | 160 – 260 |
| Fuselage height, must match Part 1 | 200 mm | 160 – 260 |
| Belly height, must match Part 1 | 110 mm | 60 – 200 |
| Fuselage wall, must match Part 1 | 1.6 mm | 1.2 – 3 |
| Main spar position, must match Part 1 | 830 mm | 700 – 950 |
| Wingspan | 2438 mm | 1600 – 3000 |
| Wing root chord | 300 mm | 200 – 340 |
| Wing tip chord | 200 mm | 120 – 300 |
| Airfoil thickness ratio | 0.12 mm | 0.08 – 0.16 |
| Airfoil camber ratio | 0.02 mm | 0 – 0.04 |
| Wing skin thickness | 1.2 mm | 0.8 – 2 |
| Carbon spar tube OD | 10 mm | 6 – 16 |
| Left-right motor spacing | 850 mm | 500 – 1000 |
| Front-rear motor spacing | 850 mm | 500 – 1000 |
| Front motor position from tail | 1135 mm | 900 – 1200 |
| VTOL propeller diameter | 330 mm | 200 – 400 |
| Carbon boom tube OD | 16 mm | 10 – 24 |
| Motor diameter | 45 mm | 30 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu