Brackets and mounts
VTOL Part 1 - Fuselage, Tail and Landing Gear
- Bounding box
- 733.1 × 1299 × 376 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Printable fuselage (6 bed-sized sections with roof hatches), battery tray, avionics plate, pusher motor mount, tail stabilizer, vertical fin and landing legs for the 2438 mm quadplane VTOL.
Parameters
| Name | Value | Range |
|---|---|---|
| Fuselage width | 200 mm | 160 – 260 |
| Fuselage height | 200 mm | 160 – 260 |
| Belly height above ground | 110 mm | 60 – 200 |
| Fuselage section length, keep under your print bed | 210 mm | 150 – 250 |
| Fuselage wall | 1.6 mm | 1.2 – 3 |
| Main wing spar position along fuselage | 830 mm | 700 – 950 |
| Carbon spar tube OD | 10 mm | 6 – 16 |
| Horizontal stabilizer span | 733 mm | 400 – 1000 |
| Stabilizer root chord | 150 mm | 100 – 220 |
| Stabilizer tip chord | 100 mm | 60 – 160 |
| Stabilizer spar position | 170 mm | 120 – 260 |
| Pusher propeller diameter | 332 mm | 200 – 400 |
| Pusher motor diameter | 45 mm | 30 – 60 |
| Vertical fin top height | 360 mm | 300 – 370 |
| Battery width | 55 mm | 40 – 80 |
| Battery length | 150 mm | 100 – 170 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu