Vortex Water Tube with BSPT Fittings

1 views

Bounding box: 208 × 208 × 632 mm
Engine: 3D Printing B-rep
Parameters: 18
Published: November 9, 2026

Download

Free to download and use. See the terms.

The prompt

This projetct is completly new, A system for make a vortex to water. Destiny to drinking water A tube 600mm long and ø200mm exterior Thickness 3mm Inside, a thread with 45° angle and 5mm thickness The thread may stop at 5mm lengt by the top and the down of the part for let place to the raccord. The raccord is a 3/8'' BSPT female Color blue like water if possible

Parameters

Name	Value	Range
Tube length	600 mm	100 – 2000
Tube outside diameter	200 mm	50 – 500
Tube wall thickness	3 mm	1.2 – 10
Helical flight angle	45 deg	10 – 80
Flight thickness	5 mm	2 – 20
Flight radial depth	25 mm	5 – 80
Clearance from tube ends	5 mm	1 – 30
Fitting hex across flats	25 mm	15 – 50
Fitting hex height	12 mm	6 – 30
End cap plate thickness	6 mm	3 – 20
Cap radial margin beyond tube	4 mm	1 – 20
Spigot insertion length	10 mm	3 – 30
Spigot wall thickness	5 mm	2 – 15
BSPT major diameter at mouth	16.7 mm	10 – 40
BSPT threaded depth	14 mm	5 – 40
BSPT radial taper per mm (mm/mm)	0.03 mm	0 – 0.1
BSPT thread pitch	1.34 mm	0.5 – 5
Sliding fit clearance	0.2 mm	0.1 – 1

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS