Everything else
Vortex Water Tube - Large 200x600 and Compact 20x60, BSPT Female Fittings
- Bounding box
- 252 × 208 × 632 mm
- Engine
- 3D Printing B-rep
- Parameters
- 32
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
A tube 60mm long and ø20mm 3mm thikness Bottom 3/8'' BSPT TOP 3/8'' BSPT interior of this tube is a spiral 45° angle
Parameters
| Name | Value | Range |
|---|---|---|
| Tube length | 600 mm | 100 – 2000 |
| Tube outside diameter | 200 mm | 50 – 500 |
| Tube wall thickness | 3 mm | 1.2 – 10 |
| Helical flight angle | 45 deg | 10 – 80 |
| Flight thickness | 5 mm | 2 – 20 |
| Flight radial depth | 25 mm | 5 – 80 |
| Clearance from tube ends | 5 mm | 1 – 30 |
| Fitting hex across flats | 25 mm | 15 – 50 |
| Fitting hex height | 12 mm | 6 – 30 |
| End cap plate thickness | 6 mm | 3 – 20 |
| Cap radial margin beyond tube | 4 mm | 1 – 20 |
| Spigot insertion length | 10 mm | 3 – 30 |
| Spigot wall thickness | 5 mm | 2 – 15 |
| BSPT major diameter at mouth | 16.7 mm | 10 – 40 |
| BSPT threaded depth | 14 mm | 5 – 40 |
| BSPT radial taper per mm (mm/mm) | 0.03 mm | 0 – 0.1 |
| BSPT thread pitch | 1.34 mm | 0.5 – 5 |
| Sliding fit clearance | 0.2 mm | 0.1 – 1 |
| Compact tube length | 60 mm | 20 – 300 |
| Compact tube outside diameter | 20 mm | 10 – 80 |
| Compact tube wall thickness | 3 mm | 1.2 – 10 |
| Compact spiral angle | 45 deg | 10 – 80 |
| Compact spiral thickness | 2 mm | 1 – 10 |
| Compact spiral radial depth | 4 mm | 1 – 12 |
| Clearance from compact tube ends | 3 mm | 1 – 20 |
| Compact fitting hex across flats | 22 mm | 10 – 50 |
| Compact fitting hex height | 8 mm | 3 – 30 |
| Compact flange plate thickness | 4 mm | 2 – 15 |
| Compact flange radial margin | 4 mm | 1 – 20 |
| Compact socket depth over tube | 6 mm | 3 – 25 |
| Compact socket collar wall | 2 mm | 1.2 – 8 |
| Compact BSPT threaded depth | 8 mm | 4 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm