Everything else
Volvo V70 Steering Wheel Hub Adapter
- Bounding box
- 90 × 90 × 55 mm
- Engine
- 3D Printing B-rep
- Parameters
- 31
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
i need a hole trough the hole thing so my honk can fit and i wnat more differnet holes that i can fit my wheel on top and make it mor round and give it spines. im thinking of using an old volvo v70 wheel to use the spines to
Parameters
| Name | Value | Range |
|---|---|---|
| Wheel bolt circle dia | 70 mm | 50 – 100 |
| Wheel bolt pilot hole dia | 4.2 mm | 3 – 8 |
| Number of wheel bolts | 6 mm | 3 – 12 |
| Wheel bolt hole depth | 12 mm | 6 – 20 |
| Second wheel bolt circle dia | 78 mm | 50 – 110 |
| Second wheel bolt count | 5 mm | 3 – 12 |
| Second pattern angle offset | 36 deg | 0 – 360 |
| Third wheel bolt circle dia | 74 mm | 50 – 110 |
| Third wheel bolt count | 4 mm | 3 – 12 |
| Third pattern angle offset | 45 deg | 0 – 360 |
| Mounting flange dia | 90 mm | 60 – 130 |
| Flange thickness | 10 mm | 6 – 20 |
| Socket outer dia | 62 mm | 40 – 90 |
| Overall hub height | 55 mm | 30 – 100 |
| Conical transition height | 20 mm | 5 – 40 |
| Bore dia at column end | 19.4 mm | 10 – 30 |
| Bore dia at wheel end | 17.2 mm | 10 – 30 |
| Number of internal splines | 20 mm | 8 – 60 |
| Spline groove depth | 1.2 mm | 0.4 – 3 |
| Spline groove width | 1.6 mm | 0.6 – 4 |
| Clamp slit width | 4 mm | 2 – 8 |
| Height where the slit ends | 40 mm | 20 – 54 |
| Clamp bolt clearance dia | 8.5 mm | 4 – 12 |
| Clamp bolt height | 18 mm | 8 – 30 |
| Clamp lug dia | 16 mm | 10 – 26 |
| Cap dia | 39.6 mm | 10 – 60 |
| Cap height | 5 mm | 2 – 12 |
| Cap recess dia | 40 mm | 10 – 60 |
| Cap recess depth | 4 mm | 1 – 10 |
| Horn wiring through hole dia | 10 mm | 4 – 25 |
| Outer body edge rounding | 3 mm | 0 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm