Everything else
VISIONX Enclosure - Outer Body
- Bounding box
- 45.8 × 72.5 × 36.4 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing model. Keep: - Overall dimensions (75 × 45 × 18 mm) - Two hanging ears - Rounded edges - Thickness Change only the outer profile. The body should be a smooth symmetrical teardrop with a rounded top and a gently tapered pointed bottom. The lower tip should end in a rounded point instead of a flat edge. Do not change the top hanging ears. Do not add any holes, ports, or internal features.
Parameters
| Name | Value | Range |
|---|---|---|
| Height | 75 mm | 50 – 150 |
| Width | 45 mm | 30 – 80 |
| Thickness | 18 mm | 10 – 30 |
| Hole Diameter | 4 mm | 2 – 8 |
| Hole Distance | 22 mm | 15 – 40 |
| Fillet Radius | 3 mm | 0.5 – 5 |
| Ear Diameter | 10 mm | 6 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like