Brackets and mounts
Victorinox Classic SD Recessed Holder
- Bounding box
- 50.0 × 22.6 × 6.8 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create a recessed holder for a Victorinox Classic SD pocket knife. Knife dimensions: 58 mm long, 18 mm wide, 9 mm thick. Internal cavity: 59 mm long, 19 mm wide, 10 mm deep. Add 1.8 mm wall thickness around the cavity. The holder should cradle approximately half the thickness of the knife, leaving the upper half exposed. Add a 17 mm long curved finger cutout on one side for removal. Add two small flexible retention lips protruding 0.6 mm inward to create a light snap fit. Round the ends to match the knife shape. Add 2 mm internal fillets and 3 mm fillets where the holder joins the phone case. The holder will later be integrated into the back of a iPhone 16 phone case
Parameters
| Name | Value | Range |
|---|---|---|
| Cavity Length | 59 mm | 40 – 80 |
| Cavity Width | 19 mm | 12 – 30 |
| Cavity Depth | 5 mm | 2 – 12 |
| Wall Thickness | 1.8 mm | 1 – 5 |
| Floor Thickness | 1.8 mm | 0.8 – 5 |
| Lip Protrusion | 0.6 mm | 0.2 – 1.5 |
| Lip Length | 10 mm | 3 – 20 |
| Lip Height | 1.5 mm | 0.5 – 4 |
| Lip Offset X | 20 mm | 5 – 28 |
| Finger Cutout Length | 17 mm | 8 – 30 |
| Finger Cutout Radius | 4 mm | 2 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent