Gears and transmission
VEX V5 DR4B Overdrive Gearbox 12T:60T
- Bounding box
- 101.6 × 76.2 × 9.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 12, 2026
Download
Free to download and use. See the terms.
The prompt
Can you give me a vex v5 2026 overdrive cad of a double reverse 4 bar with The gear ratio we will be using is 12T:60T
Parameters
| Name | Value | Range |
|---|---|---|
| Gear Module (24 DP) | 1.06 mm | 0.4 – 3 |
| Pinion Teeth | 12 teeth | 8 – 40 |
| Driven Gear Teeth | 60 teeth | 20 – 120 |
| Gear Face Width | 6.35 mm | 3 – 20 |
| Pinion Shaft Bore | 3.18 mm | 2 – 10 |
| Gear Shaft Bore | 6.35 mm | 3 – 25 |
| Plate Length (X) | 101.6 mm | 60 – 250 |
| Plate Width (Y) | 76.2 mm | 45 – 250 |
| Plate Thickness | 3.18 mm | 1.5 – 12 |
| Mounting Hole Pitch | 12.7 mm | 6 – 30 |
| Mounting Hole Diameter | 4.6 mm | 2 – 10 |
| Edge Margin To First Hole | 6.35 mm | 3 – 25 |
| Plate Corner Radius | 4 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled