Vertical Ring Wine Bottle Display

1 views

Bounding box: 200 × 120.0 × 204.0 mm
Engine: 3D Printing B-rep
Parameters: 16
Published: November 1, 2026

Download

Free to download and use. See the terms.

The prompt

with hole for bottle

Parameters

Name	Value	Range
Ring outer diameter	200 mm	120 – 320
Width of the ring band	24 mm	12 – 50
Ring plate thickness	18 mm	8 – 40
Flat cut off the bottom of the ring	6 mm	2 – 20
Chamfer around the bottle hole	1.2 mm	0 – 3
Base diameter	120 mm	70 – 200
Base height	14 mm	8 – 30
Locating lip / slot depth	4 mm	2 – 10
Lip inset from the base edge	8 mm	3 – 20
Knurl rib depth	1.5 mm	0.4 – 3
Knurl rib count	90 mm	24 – 180
Rib width as fraction of pitch	0.6 mm	0.3 – 0.9
Bottle locating hole diameter	36 mm	16 – 70
Hole offset from centre towards front	32 mm	0 – 50
Chamfer on the bottle hole	1.5 mm	0.5 – 4
Sliding clearance per side	0.3 mm	0.1 – 1

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS