Vertical Hydroponic Growing Tower (exploded multi-part)

Create a 3D CAD model of a vertical hydroponic growing tower. The tower is a tall hexagonal column, total height 215 cm, made of light gray plastic, mounted on a hexagonal base with a short tapered stand at the bottom. Planting levels: 9 levels stacked vertically, with 20 cm vertical spacing between each level. Each level has 3 visible planting pockets facing outward (around 6 pockets per level in total, spaced evenly around the hexagon). Each pocket is angled slightly upward and holds a round net pot with a 2.5 inch (6.35 cm) diameter opening. Base: a wider hexagonal base section at the bottom, about 38.5 cm wide, with a flat bottom. A horizontal black water pipe with a 1.5 inch (3.81 cm) diameter runs through the base, passing through the stand, extending about 40 cm out on each side. Inside: the tower is hollow, with a central water channel running the full height for drip irrigation. Output: a clean, solid model with accurate dimensions in centimeters, with the tower, net pots, and pipe as separate parts. Tips: The image also shows “38.5” at the top, which looks like the tower’s width, so I used it for the base. Change it if it means something else. If the tool gives you a wrong result, try simplifying the prompt (for example, model one level first, then ask for 9 repeats). I assumed 6 pockets per level, but the photo only shows 3 from the front. Change that number if your tower has a different count.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.