Gears and transmission
Vertical Gear Train with Worm Drive
- Bounding box
- 84.0 × 84.0 × 108.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- October 13, 2026
Download
Free to download and use. See the terms.
The prompt
can you make a worm gear
Parameters
| Name | Value | Range |
|---|---|---|
| Shaft Bore | 10 mm | 3 – 30 |
| Hub / Gear Bore Dia | 24 mm | 10 – 60 |
| Gear Face Width | 8 mm | 3 – 30 |
| Gap Between Gears | 4 mm | 1 – 25 |
| Hub Top Extension | 10 mm | 2 – 40 |
| Hub Bottom Extension | 10 mm | 2 – 40 |
| Top Gear Module | 2 mm | 0.5 – 5 |
| Top Gear Teeth | 20 teeth | 8 – 60 |
| Middle Gear Module | 2 mm | 0.5 – 5 |
| Middle Gear Teeth | 30 teeth | 8 – 60 |
| Bottom Gear Module | 2 mm | 0.5 – 5 |
| Bottom Gear Teeth | 40 teeth | 8 – 60 |
| Worm / Wheel Module | 2 mm | 0.75 – 5 |
| Worm Starts | 1 starts | 1 – 4 |
| Worm Pitch Dia | 20 mm | 10 – 50 |
| Worm Threaded Length | 50 mm | 15 – 120 |
| Worm Shaft Dia | 12 mm | 4 – 30 |
| Worm Journal Extension | 10 mm | 0 – 40 |
| Worm Wheel Teeth | 30 teeth | 12 – 80 |
| Worm Wheel Face Width | 10 mm | 4 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled