Vertical Garden Wall Planter 4×5

# Vertical Garden - 4 Rows x 5 Columns # Each module: 300mm x 300mm x 150mm (depth) import FreeCAD import Part from FreeCAD import Base doc = App.newDocument("VerticalGarden") # Parameters cols = 5 rows = 4 module_w = 300 module_h = 300 module_d = 150 gap = 10 # between modules spacing_x = module_w + gap spacing_y = module_h + gap # Frame dimensions frame_w = cols * spacing_x + 100 # 50mm margin each side frame_h = rows * spacing_y + 100 frame_d = 50 # Create frame (back panel) frame = Part.makeBox(frame_w, frame_h, frame_d) frame.translate(Base.Vector(-50, -50, 0)) frame_obj = doc.addObject("Part::Feature", "Frame") frame_obj.Shape = frame frame_obj.ViewObject.ShapeColor = (0.8, 0.2, 0.2) # Red # Create modules (pockets) for row in range(rows): for col in range(cols): x = col * spacing_x y = row * spacing_y z = 0 # Main pocket box pocket = Part.makeBox(module_w, module_h, module_d) pocket.translate(Base.Vector(x, y, z)) # Hollow interior (subtract smaller box) inner = Part.makeBox(module_w - 20, module_h - 20, module_d - 10) inner.translate(Base.Vector(x + 10, y + 10, z + 5)) pocket = pocket.cut(inner) obj = doc.addObject("Part::Feature", f"Module_R{row+1}_C{col+1}") obj.Shape = pocket obj.ViewObject.ShapeColor = (0.2, 0.7, 0.2) # Green # Drip irrigation lines (top of each row) for row in range(rows): y = row * spacing_y + module_h - 10 line = Part.makeLine( Base.Vector(-30, y, module_d + 10), Base.Vector(frame_w + 30, y, module_d + 10) ) line_obj = doc.addObject("Part::Feature", f"DripLine_R{row+1}") line_obj.Shape = line line_obj.ViewObject.ShapeColor = (0.0, 0.8, 0.8) # Cyan # Drainage channel (bottom front) drain = Part.makeBox(frame_w + 60, 30, 20) drain.translate(Base.Vector(-30, -30, -20)) drain_obj = doc.addObject("Part::Feature", "Drainage") drain_obj.Shape = drain drain_obj.ViewObject.ShapeColor = (1.0, 0.8, 0.0) # Yellow # Mounting holes (4 corners) hole_radius = 15 hole_depth = 30 for x, y in [(-20, -20), (frame_w - 20, -20), (-20, frame_h - 20), (frame_w - 20, frame_h - 20)]: hole = Part.makeCylinder(hole_radius, hole_depth) hole.translate(Base.Vector(x, y, -hole_depth)) hole_obj = doc.addObject("Part::Feature", f"Hole_X{x}_Y{y}") hole_obj.Shape = hole hole_obj.ViewObject.ShapeColor = (0.2, 0.4, 0.8) # Blue doc.recompute() Gui.SendMsgToActiveView("ViewFit") App.Console.PrintMessage("✅ Vertical garden generated!\n")

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.