Vertical Display IP65 Enclosure

1 views

Bounding box: 180.0 × 140.0 × 39.5 mm
Engine: Precision B-rep
Parameters: 26
Published: October 18, 2026

Download

Free to download and use. See the terms.

The prompt

请严格依据提供的PCB/LCD工程图、显示器正面参考图和背面参考图，生成可编辑、可参数化的三维装配模型。不得仅生成外观概念模型，不得将所有结构合并为无法编辑的单一实体。一、设计输入与总体约束应用场景：挖掘机驾驶室车载显示器。制造方式：FDM 3D打印。目标防护等级：IP65，设计中必须包含可实现的密封结构，最终等级以实物测试验证为准。安装姿态：竖屏。 PCB旋转方式：从原始横屏正视方向观察，整体顺时针旋转90°。主要连接器方向：朝下。外壳厚度目标：前面板外表面至后壳最外表面的总厚度尽量不超过40 mm。若PCB元器件高度、连接器结构或必要的安全间隙导致该尺寸不可实现，应明确报告冲突，不得通过压迫元器件、削薄必要壁厚或取消密封结构强行满足。外壳组成：前面板、后壳、透明防护镜片、镜片密封结构、前后壳密封圈、PCB固定结构、紧固件和外部安装结构。外观参考：前面板采用所提供图片中的简洁矩形窄边框风格；后壳参考所提供的带接口、加强筋及安装结构的工业外壳。

Parameters

Name	Value	Range
Overall Width X	180 mm	140 – 260
Overall Height Y	120 mm	90 – 220
Total Enclosure Depth Z	38 mm	30 – 50
Front Panel Thickness	3 mm	2 – 6
Display Bezel Horizontal Margin	8 mm	4 – 20
Display Bezel Vertical Margin	8 mm	4 – 20
Side Wall Thickness	2.5 mm	1.5 – 5
Rear Wall Thickness	3 mm	2 – 6
Lens Gasket Groove Width	2 mm	1 – 4
Lens Gasket Groove Depth	0.8 mm	0.4 – 1.5
Lens Gasket Clearance	1.5 mm	0.5 – 3
Perimeter Seal Groove Width	2.5 mm	1.5 – 5
Perimeter Seal Groove Depth	1 mm	0.5 – 1.5
Perimeter Seal Margin	4 mm	2 – 8
PCB Boss Diameter	5 mm	3 – 8
PCB Boss Height	8 mm	4 – 15
PCB Boss Edge Margin	8 mm	4 – 15
PCB Screw Hole Diameter	2.5 mm	1.5 – 4
Main Connector Opening Width	25 mm	10 – 50
Main Connector Opening Height	10 mm	5 – 20
Connector X Offset	0 mm	-30 – 30
Connector Z Offset	-6 mm	-15 – 15
Mounting Tab Width	20 mm	10 – 40
Mounting Tab Length	10 mm	5 – 25
Mounting Tab Thickness	3 mm	2 – 8
Mounting Tab Hole Diameter	4.5 mm	3 – 8

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS