Brackets and mounts
Ventilated Lattice Basket Holder
- Bounding box
- 153.0 × 151.0 × 180.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- August 12, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing holder. Make the basket lightweight and highly ventilated. Replace the solid front, right and rear walls with an open lattice structure. Requirements: - Keep the solid bottom plate. - Keep the solid LEFT mounting plate with the screw holes. - Front, right and rear sides should consist of a simple grid. - Grid bars approximately 4 mm thick. - Openings approximately 20 x 20 mm. - Basket wall height approximately 60 mm. - Keep all corners connected so the basket remains one single solid part. - Keep the top completely open. - Keep the rear lower area especially open for the power cable. - Do not cover or obstruct the front air outlet of the Mintion. - Keep the existing internal dimensions unchanged. - Reduce unnecessary material. - Optimize for FDM printing without supports.
Parameters
| Name | Value | Range |
|---|---|---|
| Inner Width | 143 mm | 50 – 300 |
| Inner Depth | 143 mm | 50 – 300 |
| Basket Wall Height | 60 mm | 20 – 100 |
| Front Wall Height | 25 mm | 10 – 100 |
| Bottom Thickness | 5 mm | 2 – 10 |
| Side Wall Thickness | 4 mm | 2 – 8 |
| Mounting Plate Height | 180 mm | 100 – 300 |
| Mounting Plate Depth | 150 mm | 100 – 200 |
| Mounting Plate Thickness | 6 mm | 3 – 10 |
| Screw Hole Diameter | 5.5 mm | 3 – 10 |
| Rib Length | 20 mm | 10 – 40 |
| Rib Height | 30 mm | 10 – 50 |
| Rib Thickness | 4 mm | 2 – 8 |
| Grid Bar Thickness | 4 mm | 2 – 8 |
| Grid Opening | 20 mm | 10 – 40 |
| Grid Side Margin | 2 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent