Gears and transmission
Vehicle Master Assembly
- Bounding box
- 4400.0 × 1800.0 × 1250.0 mm
- Engine
- Precision B-rep
- Parameters
- 60
- Published
- September 25, 2026
Download
Free to download and use. See the terms.
The prompt
MASTER ASSEMBLY │ ├── Chassis ├── Engine ├── Gearbox ├── Front Suspension ├── Rear Suspension ├── Steering ├── Interior ├── Body ├── Wiring ├── Fuel System ├── Cooling ├── Air Suspension └── Exhaust
Parameters
| Name | Value | Range |
|---|---|---|
| Front Overhang | 800 mm | 200 – 2000 |
| Wheelbase | 2700 mm | 1500 – 4000 |
| Rear Overhang | 900 mm | 200 – 2000 |
| Ground Clearance | 200 mm | 80 – 500 |
| Track Width | 1600 mm | 1000 – 2400 |
| Chassis Length | 4400 mm | 2000 – 6000 |
| Chassis Width | 1400 mm | 800 – 2400 |
| Chassis Height | 250 mm | 80 – 600 |
| Engine Length | 700 mm | 300 – 1600 |
| Engine Width | 600 mm | 200 – 1200 |
| Engine Height | 650 mm | 200 – 1200 |
| Engine Offset From Front Axle | 100 mm | -600 – 1200 |
| Gearbox Length | 400 mm | 150 – 1200 |
| Gearbox Width | 500 mm | 150 – 1000 |
| Gearbox Height | 200 mm | 80 – 600 |
| Body Width | 1800 mm | 1200 – 2600 |
| Body Height | 800 mm | 300 – 1500 |
| Interior Length | 1800 mm | 500 – 3000 |
| Interior Width | 1500 mm | 500 – 2200 |
| Interior Height | 400 mm | 150 – 800 |
| Interior X Start | 1900 mm | 0 – 4000 |
| Front Suspension Length | 400 mm | 100 – 900 |
| Front Suspension Width | 1600 mm | 800 – 2400 |
| Front Suspension Height | 250 mm | 80 – 500 |
| Front Suspension Z Center | 125 mm | 40 – 400 |
| Rear Suspension Length | 400 mm | 100 – 900 |
| Rear Suspension Width | 1600 mm | 800 – 2400 |
| Rear Suspension Height | 250 mm | 80 – 500 |
| Rear Suspension Z Center | 125 mm | 40 – 400 |
| Steering Rack Length (Y) | 1400 mm | 600 – 2400 |
| Steering Rack Depth (X) | 200 mm | 50 – 600 |
| Steering Rack Height | 100 mm | 30 – 300 |
| Steering X Offset From Front Axle | -300 mm | -900 – 900 |
| Steering Z Center | 500 mm | 250 – 1000 |
| Radiator Thickness | 80 mm | 20 – 300 |
| Radiator Width | 1200 mm | 400 – 2400 |
| Radiator Height | 500 mm | 150 – 1200 |
| Radiator X Position | 100 mm | -300 – 1800 |
| Exhaust Length | 2000 mm | 300 – 4400 |
| Exhaust Width | 80 mm | 20 – 300 |
| Exhaust Height | 100 mm | 30 – 300 |
| Exhaust X Start | 1200 mm | 0 – 4000 |
| Fuel Tank Length | 700 mm | 200 – 1600 |
| Fuel Tank Width | 600 mm | 200 – 1400 |
| Fuel Tank Height | 150 mm | 40 – 300 |
| Fuel Tank X Center | 2500 mm | 500 – 4200 |
| Compressor Length | 200 mm | 50 – 600 |
| Compressor Width | 200 mm | 50 – 600 |
| Compressor Height | 150 mm | 50 – 400 |
| Compressor X Center | 3800 mm | 0 – 4400 |
| Compressor Y Center | 0 mm | -900 – 900 |
| Compressor Z Center | 300 mm | 0 – 900 |
| Air Spring Diameter | 250 mm | 100 – 600 |
| Air Spring Height | 300 mm | 80 – 700 |
| Wiring Harness Length | 4000 mm | 200 – 4400 |
| Wiring Harness Width | 100 mm | 20 – 300 |
| Wiring Harness Height | 100 mm | 20 – 300 |
| Wiring X Start | 200 mm | 0 – 2000 |
| Wiring Y Offset | 600 mm | -800 – 800 |
| Wiring Z Base | 150 mm | 0 – 600 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled