Brackets and mounts
Vehicle ECU Mounting Bracket
- Bounding box
- 308.6 × 262.9 × 89.5 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design a sheet metal mounting bracket for a vehicle ECU using the following precise geometric constraints: - Base Plate: Flat rectangular surface, dimensions 12.150 inches length by 10.350 inches width, material thickness 0.075 inches. - Flanges: Two parallel vertical side flanges rising 3.450 inches high from the 12.150-inch edges. Inner bend radius must be 0.075 inches. - ECU Mounting Pattern: Concentric rectangular pattern of 4 through-holes centered on the base plate. Hole spacing is exactly 7.500 inches center-to-center along the length, and 6.500 inches center-to-center along the width. - Hole Diameter: All 4 ECU mounting holes must be 0.190 inches in diameter to clear #10-32 machine screws. - Edge Treatments: Apply a 0.250-inch fillet radius to all four exterior corners of the base plate and flanges to remove sharp edges.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 12.15 in | 6 – 24 |
| Base Width | 10.35 in | 4 – 20 |
| Material Thickness | 0.08 in | 0.03 – 0.25 |
| Flange Height | 3.45 in | 0.5 – 8 |
| Inner Bend Radius | 0.08 in | 0.03 – 0.5 |
| ECU Hole Spacing (Length) | 7.5 in | 2 – 12 |
| ECU Hole Spacing (Width) | 6.5 in | 2 – 10 |
| ECU Hole Diameter | 0.19 in | 0.1 – 0.5 |
| Corner Fillet Radius | 0.25 in | 0 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu