Everything else
Vector MP3 Player Case (18650)
- Bounding box
- 112 × 78 × 30 mm
- Engine
- 3D Printing B-rep
- Parameters
- 34
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
where are all the other holes and slots on the player, I need access to the SD card module, the usb-c and the headphone jack aand powerswitch
Parameters
| Name | Value | Range |
|---|---|---|
| Case width X | 112 mm | 80 – 160 |
| Case depth Y | 78 mm | 60 – 120 |
| Case body height Z | 27 mm | 16 – 50 |
| Corner radius | 8 mm | 2 – 20 |
| Side wall thickness | 2.5 mm | 1.2 – 5 |
| Back floor thickness | 2.5 mm | 1.2 – 5 |
| Panel thickness | 3.5 mm | 2 – 6 |
| Display window width | 42 mm | 10 – 90 |
| Display window height | 26 mm | 8 – 60 |
| Display window X offset | -25 mm | -45 – 45 |
| Display window Y offset | 13 mm | -30 – 30 |
| Control hole diameter | 14 mm | 6 – 30 |
| Control hole X offset | 30 mm | -45 – 45 |
| Control hole Y offset | 20 mm | -30 – 30 |
| Screw clearance diameter | 3.4 mm | 2.5 – 6 |
| 18650 holder length | 78 mm | 55 – 100 |
| 18650 holder width | 22 mm | 16 – 35 |
| 18650 holder height | 21 mm | 16 – 30 |
| Battery holder Y centre | -21.5 mm | -40 – 5 |
| USB-C slot width | 9.5 mm | 4 – 20 |
| USB-C slot height | 4 mm | 2 – 12 |
| USB-C slot Y position | -21.5 mm | -40 – 30 |
| USB-C slot centre height | 6 mm | 3 – 20 |
| Headphone jack hole diameter | 6.5 mm | 3.5 – 12 |
| Headphone jack X position | -25 mm | -45 – 45 |
| Headphone jack Z position | 14 mm | 5 – 25 |
| MicroSD slot width | 13 mm | 8 – 24 |
| MicroSD slot height | 2.8 mm | 1.5 – 6 |
| MicroSD slot X position | 12 mm | -45 – 45 |
| MicroSD slot Z position | 14 mm | 5 – 25 |
| Power switch cutout length | 9.5 mm | 4 – 18 |
| Power switch cutout height | 4.5 mm | 2 – 12 |
| Power switch Y position | 14 mm | -30 – 30 |
| Power switch Z position | 14 mm | 5 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm