Everything else
Vebriqo Control Panel V1.0 Enclosure
- Bounding box
- 200 × 160 × 54.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 46
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
rozdzielisz mi pokrywke od dołu?
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 200 mm | 100 – 400 |
| Overall depth | 160 mm | 80 – 300 |
| Height at the front | 30 mm | 15 – 120 |
| Height at the rear | 50 mm | 15 – 150 |
| Wall thickness | 2.5 mm | 1.2 – 6 |
| Outer corner radius | 12 mm | 2 – 30 |
| Top panel thickness | 3 mm | 1.5 – 8 |
| Total side clearance | 0.4 mm | 0.2 – 2 |
| Panel recess into body | 0.6 mm | 0.3 – 1.5 |
| Bottom cover thickness | 3 mm | 1.5 – 8 |
| Screw clearance dia | 3.4 mm | 2 – 6 |
| Counterbore dia | 6.5 mm | 3 – 12 |
| Counterbore depth | 1.6 mm | 0.5 – 4 |
| Screw offset X | 94 mm | 20 – 99 |
| Screw offset Y | 55 mm | 20 – 79 |
| Corner post dia | 9 mm | 5 – 18 |
| Post pilot hole dia | 3 mm | 2 – 5 |
| Post pilot hole depth | 12 mm | 5 – 25 |
| RGB button hole dia | 14 mm | 8 – 30 |
| Button spacing X | 28 mm | 15 – 45 |
| Button row 1 Y | 5 mm | -70 – 70 |
| Button row 2 Y | -28 mm | -70 – 70 |
| Potentiometer hole dia | 7.2 mm | 4 – 16 |
| Potentiometer spacing X | 40 mm | 15 – 60 |
| Potentiometer row Y | 52 mm | -70 – 70 |
| OLED window width | 21 mm | 10 – 60 |
| OLED window height | 11 mm | 5 – 40 |
| OLED centre X | 0 mm | -90 – 90 |
| OLED centre Y | -58 mm | -74 – 74 |
| OLED hole spacing X | 23.5 mm | 0 – 40 |
| OLED hole spacing Y | 23.5 mm | 0 – 40 |
| OLED hole dia | 2.4 mm | 1 – 5 |
| Pico W centre X | 0 mm | -90 – 90 |
| Pico W centre Y | 32 mm | -70 – 70 |
| Pico W hole spacing X | 46 mm | 10 – 60 |
| Pico W hole spacing Y | 17 mm | 5 – 40 |
| ADS1115 centre X | -62 mm | -90 – 90 |
| ADS1115 centre Y | 32 mm | -70 – 70 |
| ADS1115 hole spacing X | 20 mm | 5 – 40 |
| ADS1115 hole spacing Y | 12 mm | 5 – 40 |
| Standoff dia | 6 mm | 3 – 12 |
| Standoff height | 8 mm | 3 – 30 |
| Standoff pilot hole dia | 2.2 mm | 1 – 5 |
| Cable guide post dia | 4 mm | 2 – 10 |
| Cable guide post height | 6 mm | 2 – 20 |
| Bottom cover separation | 0 mm | 0 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Flip-Top Bottle Cap with Center Hole
我要生成類似瓶蓋跟市售一模一樣 可以上掀蓋然後打開中間會有一個洞
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
