3D preview of Vaporesso XROS 5-Cartridge Case
Loading the interactive model…
Interactive 3D model of Vaporesso XROS 5-Cartridge Case

Brackets and mounts

Vaporesso XROS 5-Cartridge Case

1 views
Bounding box
175.3 × 32.6 × 35.0 mm
Engine
Precision B-rep
Parameters
35
Published
November 21, 2026

Download

Free to download and use. See the terms.

The prompt

Design a compact 3D-printable storage case from scratch for 5 Vaporesso XROS cartridges. Main body: * 5 individual cartridge slots. * Cartridge base dimensions: 22.28 × 11.62 mm, 11 mm insertion depth. * Corner radius: 3–4 mm. * Tank dimensions: 23 × 13 mm. * Total cartridge height: approximately 37.6 mm. * Slots must hold only the bottom 11 mm of each cartridge. * Arrange slots efficiently to minimize overall dimensions. * Flat bottom, durable walls and slightly raised protective side walls. * Add clean, small chamfers along ALL external body edges. Lid and fastening: * Separate, low-profile removable lid. * Use two simple snap-fit clips, one on each opposite side. * No rails or guiding mechanisms. * Clips must securely hold the lid while allowing easy removal. * Moderate fastening force with a satisfying click. * Keep the lid as low as possible while ensuring sufficient clearance for the cartridges. * Add small textured grip grooves for easy lid removal. FDM / PLA requirements: * Account for approximately 0.3 mm dimensional narrowing in printed grooves. * Provide suitable tolerances for snap-fit connections. * Avoid fragile clips, thin walls and excessive friction. * Optimize for easy FDM printing with minimal supports. Final goal: Create two separate, fully functional printable parts: the body and the removable lid. Prioritize compact dimensions, durability, simple construction, comfortable opening and secure closure. Ensure all dimensions and connections are geometrically compatible.

Parameters

NameValueRange
Layout gap (X spacing between parts)100 mm20 – 300
Body outer length (X)73 mm40 – 120
Body outer width (Y)28 mm20 – 60
Body wall height (rim)15 mm8 – 30
Perimeter wall thickness2.5 mm1.5 – 5
Outer corner radius3.5 mm1 – 6
Divider height14 mm6 – 30
Cartridge count5 pcs1 – 8
Pocket pitch (X)14 mm12 – 20
Pocket width (X)12 mm10 – 16
Pocket length (Y)22.7 mm18 – 30
Pocket depth from rim11 mm6 – 20
Pocket corner radius3.5 mm1 – 6
Snap tab width8 mm4 – 12
Snap tab thickness1.2 mm0.8 – 2
Snap tab length6 mm3 – 12
Bump protrusion0.6 mm0.2 – 1.2
Bump height2 mm1 – 4
Bump centre below rim3 mm1 – 6
External edge chamfer0.6 mm0.2 – 1
Lid cavity length (X)73.6 mm40 – 120
Lid cavity width (Y)28.6 mm20 – 60
Lid skirt wall thickness2 mm1.2 – 4
Lid inner corner radius3.8 mm1 – 6
Lid ceiling thickness2.4 mm1.2 – 5
Lid total height35 mm20 – 60
Lid overlap onto body walls5 mm2 – 10
Snap recess depth0.8 mm0.3 – 1.5
Snap recess width8.6 mm4 – 12
Snap recess height3 mm1 – 5
Grip groove width (incl. PLA allowance)1.3 mm0.8 – 3
Grip groove depth0.6 mm0.2 – 1.2
Grip groove count4 pcs1 – 8
Grip groove pitch (Z)2.4 mm1.5 – 6
First groove height from lid bottom6.5 mm5 – 25

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.