Everything else
渔船半球天线罩 V4（光伏翼板 + 1S2P 26650）
- Bounding box
- 337 × 200 × 234 mm
- Engine
- 3D Printing B-rep
- Parameters
- 30
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
半球形玻纤天线罩，内装 100×100 mm PCB 和 1S2P 26650 LiFePO4，外侧合装 166×125×2 mm 6W 光伏板，支持平甲板和 Ø25 竖管
Parameters
| Name | Value | Range |
|---|---|---|
| Dome outer diameter | 156 mm | 150 – 220 |
| Dome curved height | 78 mm | 40 – 110 |
| Straight skirt height | 40 mm | 38 – 70 |
| Dome wall thickness | 3 mm | 2 – 5 |
| Flange and base diameter | 200 mm | 190 – 210 |
| Dome flange thickness | 6 mm | 4 – 10 |
| Base plate thickness | 8 mm | 6 – 14 |
| Cable gland hole diameter | 20.5 mm | 12 – 26 |
| Dome screw bolt circle | 184 mm | 170 – 196 |
| Deck and adapter bolt circle | 130 mm | 116 – 146 |
| O-ring groove centre diameter | 166 mm | 160 – 180 |
| O-ring groove width | 3.6 mm | 2 – 6 |
| O-ring groove depth | 2.4 mm | 1 – 4 |
| Solar wire hole diameter | 6 mm | 4 – 10 |
| PCB mounting hole square pitch | 90 mm | 60 – 96 |
| PCB post height | 34 mm | 32 – 50 |
| PCB post diameter | 9 mm | 6 – 14 |
| M3 self-tapping pilot diameter | 2.6 mm | 2 – 4 |
| Cell saddle diameter | 26.8 mm | 26 – 28 |
| Cell axis offset from centre | 30 mm | 28 – 32 |
| Panel long side | 166 mm | 120 – 170 |
| Panel short side | 125 mm | 90 – 130 |
| Pocket extra size total | 2 mm | 1 – 3 |
| Pocket depth including tape | 3 mm | 2.5 – 4 |
| Panel tilt | 7 deg | 5 – 10 |
| Hub plate thickness | 8 mm | 6 – 12 |
| Pipe outer diameter | 25 mm | 20 – 50 |
| Pipe insertion depth | 60 mm | 40 – 70 |
| Collar height | 90 mm | 80 – 110 |
| Adapter plate thickness | 10 mm | 8 – 14 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm