Everything else
Крючок на полотенцесушитель ромб — v3.6
- Bounding box
- 40.3 × 59.5 × 13.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Adjusted Крючок на полотенцесушитель ромб — v3.6: bar_side=20.5
Parameters
| Name | Value | Range |
|---|---|---|
| Bar opening square side | 20.5 mm | 15 – 40 |
| Fit clearance per side | 0 mm | 0 – 1 |
| Clamp wall thickness | 4 mm | 3 – 8 |
| Clamp grip along lower front face | 6 mm | 3 – 15 |
| Latch length along lower back face | 2 mm | 0 – 8 |
| Hook width | 13 mm | 8 – 30 |
| Hook band thickness | 4 mm | 3 – 8 |
| Extra drop of the hook below the bar | 12 mm | 0 – 40 |
| Hook bend radius | 9 mm | 5 – 15 |
| Tip rise | 7 mm | 5 – 15 |
| Tip end: 0 plain rounded, 1 round coin | 0 mm | 0 – 1 |
| Edge rounding | 1.4 mm | 0.5 – 1.9 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm