216.720034
Loading the interactive model…
Interactive 3D model of 공 던지는 장치 v2 (가벼운 팔 + 선 통로)

Everything else

공 던지는 장치 v2 (가벼운 팔 + 선 통로)

1 views
Bounding box
200 × 216.7 × 34 mm
Engine
3D Printing B-rep
Parameters
30
Published
November 15, 2026

Download

Free to download and use. See the terms.

The prompt

공 던지는 장치 v2: 던지는 팔을 더 가볍고 작게 재설계(얇은 빔 + 얇은 껍질 컵), 서보 회전축을 실제 서보 구조(상면 끝쪽 오프셋 출력축, 눕혀서 축이 가로)에 맞게 수정, 모터 선이 빠져나가는 홈 추가. 나사 없이 끼움 방식.

Parameters

NameValueRange
Tile side100 mm60 – 150
Tile thickness6 mm4 – 10
Fit clearance per side0.3 mm0.1 – 0.6
Dovetail neck width14 mm8 – 20
Dovetail tip width22 mm14 – 32
Dovetail length8 mm5 – 14
Body size along the shaft axis38 mm30 – 45
Body length40 mm35 – 45
Body width20 mm16 – 26
Shaft distance from the servo end10 mm6 – 14
Shaft diameter6 mm4 – 8
Shaft length above the case9 mm9 – 12
Flange underside height from servo bottom20 mm12 – 30
Holder floor thickness6 mm4 – 10
Holder wall thickness4 mm2 – 8
Press-fit rib height0.6 mm0.2 – 1
Peg width X5 mm3 – 8
Peg length Y10 mm6 – 16
Peg depth into tile4 mm2 – 5
Peg offset from centre14 mm8 – 24
Cable exit distance from servo bottom8 mm4 – 16
Cable slot width10 mm6 – 16
Ball diameter40 mm20 – 60
Shaft to cup centre48 mm30 – 80
Hub diameter14 mm10 – 20
Hub thickness5 mm4 – 6
Beam thickness3 mm2 – 5
Cup shell thickness1.5 mm1.2 – 3
Cup depth9 mm5 – 14
Arm angle from rest, rotating upward0 deg0 – 170

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

공 던지는 장치 v2 (가벼운 팔 + 선 통로) - Free CAD Model (STEP, STL) | TextoCAD