Brackets and mounts
Ute Rear Rack - Bent RHS Frame, Legs & Foot Plates
- Bounding box
- 2006.5 × 90.0 × 871.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
this is a rear rack im planning to build and weld for my ute im trying to find the height at which the first legs need to be in mm i currently have cut slits and bend and welded the top half of the rack. dimensions of this is 1280mm Length for the top flat bar on the ends of that its bend about 40 degrees then the next piece is about 340mm and the bottom of that has 30degree bend and at the bottom of that it bends to 10 degrees and this is ment to connect to the bottom legs and it has a 10 degree cut on top so joined is 20 degrees im trying to figure out the height of that leg at the bottom to make the over all height 871mm note im using 76x38 RHS steel tubing 1.5mm thick and the bracket at the bottom thats welded to the feet is 4mm thick
Parameters
| Name | Value | Range |
|---|---|---|
| Top flat bar length | 1280 mm | 600 – 2000 |
| 1st bend angle (from horizontal) | 40 deg | 5 – 70 |
| Angled section length | 340 mm | 100 – 700 |
| 2nd bend angle (added) | 30 deg | 0 – 50 |
| Mid section length | 80 mm | 20 – 300 |
| 3rd bend angle (added) | 10 deg | 0 – 30 |
| End section length | 60 mm | 20 – 300 |
| Overall rack height (target) | 871 mm | 500 – 1500 |
| RHS height (in bend plane) | 76 mm | 20 – 150 |
| RHS width (across rack) | 38 mm | 15 – 100 |
| Leg top mitre cut | 10 deg | 0 – 30 |
| Foot plate thickness | 4 mm | 2 – 12 |
| Foot plate length | 130 mm | 80 – 260 |
| Foot plate width | 90 mm | 50 – 200 |
| Foot bolt hole diameter | 11 mm | 5 – 20 |
| Foot bolt hole spacing | 96 mm | 40 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu