Brackets and mounts
Updated enclosure with sliding rails and enlarged cone
- Bounding box
- 50.1 × 50.1 × 64.1 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
can you make the cone bigger like covering the screwing part and add thickness to the cubical part so that the screws will go form the square mounting plate to the cubical body
Parameters
| Name | Value | Range |
|---|---|---|
| Cube Side Length | 50 mm | 20 – 100 |
| Cube Depth | 40 mm | 20 – 80 |
| Wall Thickness | 5 mm | 2 – 10 |
| PCB Thickness | 1.6 mm | 0.8 – 3.2 |
| PCB Lateral Clearance | 0.2 mm | 0.1 – 0.5 |
| Rail Groove Depth | 2.5 mm | 1 – 5 |
| Groove Stop Offset | 5 mm | 2 – 15 |
| Outer Edge Chamfer | 1 mm | 0 – 3 |
| M3 Screw Hole Diameter | 3.2 mm | 2.5 – 4 |
| Screw Hole Offset from Edge | 8 mm | 5 – 15 |
| Mounting Plate Side | 50 mm | 20 – 100 |
| Mounting Plate Thickness | 4 mm | 2 – 8 |
| Boss Outer Diameter | 12 mm | 6 – 20 |
| Boss Inner Diameter | 8 mm | 4 – 16 |
| Boss Height | 10 mm | 5 – 20 |
| Boss Base Fillet | 1.5 mm | 0 – 3 |
| Cone Length | 20 mm | 10 – 40 |
| Cone Base Outer Diameter | 50 mm | 25 – 80 |
| Cone Tip Outer Diameter | 20 mm | 10 – 40 |
| Cone Base Inner Diameter | 46 mm | 20 – 76 |
| Cone Tip Inner Diameter | 16 mm | 6 – 36 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent