Unprotected Quad-X Drone Frame (cage optional)

1 views

Bounding box: 392.0 × 392.0 × 26.0 mm
Engine: Precision B-rep
Parameters: 32
Published: September 29, 2026

Download

Free to download and use. See the terms.

The prompt

design a drone first without protection

Parameters

Name	Value	Range
Body Plate Diameter	90 mm	40 – 200
Body Plate Thickness	6 mm	2 – 30
Center Bore (wiring/stack)	22 mm	0 – 80
Bolt Circle Dia	60 mm	0 – 160
Bolt Hole Dia	3.2 mm	1 – 12
Bolt Hole Count	4 count	0 – 12
Arm Count	4 count	3 – 8
Arm Length	80 mm	20 – 250
Tip Drop (frame dihedral)	8 mm	0 – 60
Arm Half-Thickness	4 mm	1 – 15
Arm Root Height	14 mm	3 – 60
Motor Pad Length	22 mm	5 – 80
Motor Pad Height	6 mm	1 – 40
Stiffening Rib Height	10 mm	0 – 60
Rib Angle	60 deg	5 – 89
Rib Base Start	0.15 ratio	0 – 0.9
Rib Base End	0.75 ratio	0.05 – 1
Wire Hole Radius	65 mm	20 – 200
Wire Hole Dia	4 mm	0.5 – 20
Motor Can Dia	28 mm	8 – 80
Motor Can Height	20 mm	5 – 60
Propeller Dia	140 mm	40 – 400
Prop Hub Dia	16 mm	4 – 60
Blade Count	3 count	2 – 6
Blade Root Width	16 mm	3 – 60
Blade Thickness	3 mm	0.6 – 12
Prop Hub Height	6 mm	2 – 30
Blade Pitch	15 deg	0 – 45
Deployable Cage (0=off, 1=on)	0 bool	0 – 1
Cage Wall Thickness	3 mm	0.6 – 15
Cage Bottom Extend	5 mm	0 – 60
Cage Top Extend	0 mm	0 – 60

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS