Gears and transmission
Universal Clamping Automated Kitchen Stirrer Assembly
- Bounding box
- 280.0 × 66.0 × 121.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- October 11, 2026
Download
Free to download and use. See the terms.
The prompt
*"Generate a fully integrated, single-file 3D assembly model of an adaptive universal-clamping automated kitchen stirrer system, engineered precisely for 3D printing. The model must consist of the following interconnected components rendered as a single continuous mesh or multi-body assembly file with proper printing clearances: Central Spanning Bridge: A flat horizontal rectangular structural plate with dimensions 280mm length, 50mm width, and 7mm thickness. Running along the central longitudinal axis, integrate two parallel slot tracks each 90mm long and 8.5mm wide to allow sliding clamp adjustment. In the geometric center of the plate, create a precise circular through-hole with a diameter of 26mm designed to seat a 12V DC gear motor hub. Adjustable Pot-Rim Side Clamps: Two independent U-shaped sliding clamp blocks that interface with the spanning bridge slots. Each block features an integrated downward-facing hooked lip with a 15mm vertical depth and 10mm width designed to securely grip pot rims ranging from 180mm to 300mm in diameter. On the top face of each slider, include a vertical threaded stud cylinder of 8mm outer diameter and 15mm height to accommodate a wing-nut fastener. Motor Housing Enclosure: A central cubic housing box mounted directly over the 26mm center hole, measuring 50mm length, 50mm width, and 60mm height with an open bottom face. Include hollow interior clearance for a standard high-torque DC gear motor and two opposing 4mm side screw holes for hardware fastening. Vertical Stirring Shaft & Blade Paddle: Passing through the center motor aperture, model a vertical cylindrical drive shaft of 6mm diameter and 120mm length. The bottom end of the shaft must terminate into a 3-blade angled scraping paddle (spanning an overall diameter of 70mm) optimized for food displacement and bottom-simmer scraping. Export format required: Single unified STEP or high-resolution STL file optimized for direct slicing and 3D printing without non-manifold geometry or floating fragments."*
Parameters
| Name | Value | Range |
|---|---|---|
| Bridge Length | 280 mm | 120 – 600 |
| Bridge Width | 50 mm | 20 – 150 |
| Bridge Thickness | 7 mm | 3 – 20 |
| Slot Track Length | 90 mm | 20 – 300 |
| Slot Track Width | 8.5 mm | 3 – 25 |
| Slot Centre Spacing | 36 mm | 12 – 120 |
| Centre Motor Hole Dia | 26 mm | 8 – 60 |
| Clamp Distance From Centre | 38 mm | 0 – 200 |
| Clamp Block Length | 24 mm | 10 – 80 |
| Clamp Block Depth | 30 mm | 10 – 80 |
| Clamp Block Height | 12 mm | 4 – 40 |
| Hooked Lip Width | 10 mm | 4 – 60 |
| Hooked Lip Thickness | 8 mm | 2 – 20 |
| Hooked Lip Drop | 15 mm | 4 – 60 |
| Hook Toe Reach | 8 mm | 2 – 30 |
| Hook Toe Thickness | 3 mm | 1 – 12 |
| Threaded Stud Dia | 8 mm | 3 – 20 |
| Threaded Stud Height | 15 mm | 5 – 50 |
| Housing Length | 50 mm | 20 – 120 |
| Housing Width | 50 mm | 20 – 120 |
| Housing Height | 60 mm | 20 – 150 |
| Housing Wall Thickness | 3 mm | 1.5 – 15 |
| Housing Top Cap | 4 mm | 1.5 – 25 |
| Side Screw Hole Dia | 4 mm | 1 – 12 |
| Drive Shaft Dia | 6 mm | 3 – 20 |
| Drive Shaft Length | 120 mm | 40 – 320 |
| Paddle Overall Dia | 70 mm | 20 – 180 |
| Paddle Blade Count | 3 pcs | 2 – 6 |
| Blade Thickness | 3 mm | 1 – 12 |
| Blade Height | 22 mm | 5 – 60 |
| Blade Outer Edge Rise | 8 mm | 0 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled