Under-Desk Station Holder

1 views

Bounding box: 208 × 121 × 33.5 mm
Engine: 3D Printing B-rep
Parameters: 20
Published: November 14, 2026

Download

Free to download and use. See the terms.

The prompt

Make walls more strong and make space from right side for wires from the empty wall. Where empty wall right now you can just make empty space for 30mm at the center for charge wire

Parameters

Name	Value	Range
Device length, X	210 mm	50 – 400
Device width, Y	90 mm	20 – 300
Device height, Z	30 mm	5 – 150
Wall thickness	4 mm	1.2 – 8
Clearance per side	0.5 mm	0.1 – 1.5
Base plate thickness	3 mm	1.2 – 8
Device overhang at the open front	6 mm	0 – 40
Buttress rib width	5 mm	2 – 12
Rib inset from the tab ends	1 mm	0 – 8
Flange reach out from the wall	11 mm	8 – 25
Flange thickness at its outer edge	3 mm	2 – 6
Mounting tab length	36 mm	15 – 80
Tab inset from the part ends	8 mm	2 – 80
Screw clearance hole dia	4.5 mm	3 – 6
Counterbore dia for the screw head	7.5 mm	5 – 12
Counterbore depth	3 mm	1.5 – 6
Cable notch width in back wall, 0=none	24 mm	0 – 60
Cable notch height	8 mm	0 – 20
Right-side wire opening width, 0=none	30 mm	0 – 120
Right-side wire opening height	40 mm	0 – 120

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS