Gears and transmission
UAV Parts Set
- Bounding box
- 283.0 × 31.0 × 300.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- August 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create separate lightweight UAV parts, units mm. Landing gear: two skid rods 240 long dia 4, skid spacing 180, ground clearance 60, four support rods dia 3. Three servo mounts: inside pocket 26x15x27, wall thickness 2, mount flange 6. Three control horns: base 20x10x2, height 18, hole dia 2. Pushrods: two rods 70 long dia 2, one rod 300 long dia 2. Keep parts separate. STEP-compatible solids.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 20 mm | 1 – 100 |
| Skid Rod Diameter | 4 mm | 1 – 10 |
| Skid Rod Length | 240 mm | 50 – 500 |
| Support Rod Diameter | 3 mm | 1 – 10 |
| Support Rod Length | 60 mm | 10 – 200 |
| Servo Pocket Width | 26 mm | 10 – 50 |
| Servo Pocket Height | 15 mm | 5 – 40 |
| Servo Pocket Depth | 27 mm | 10 – 50 |
| Servo Wall Thickness | 2 mm | 0.5 – 5 |
| Servo Flange Width | 6 mm | 1 – 20 |
| Horn Base Length | 20 mm | 10 – 40 |
| Horn Base Width | 10 mm | 5 – 20 |
| Horn Base Thickness | 2 mm | 0.5 – 5 |
| Horn Arm Height | 18 mm | 5 – 30 |
| Horn Arm Width | 6 mm | 2 – 15 |
| Horn Arm Thickness | 2 mm | 0.5 – 5 |
| Horn Hole Diameter | 2 mm | 0.5 – 5 |
| Pushrod Diameter | 2 mm | 1 – 5 |
| Short Pushrod Length | 70 mm | 20 – 200 |
| Long Pushrod Length | 300 mm | 100 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a