Brackets and mounts
UAV Mounting Parts
- Bounding box
- 547.5 × 70.0 × 62.0 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- August 8, 2026
Download
Free to download and use. See the terms.
The prompt
Create separate UAV mounting parts, units mm. Battery tray: 150x45x1.5, two 20 wide strap slots. Flight controller tray: 110x70x1.5, 4 corner holes dia 3. GPS platform: 45x45x2, mast dia 8, mast height 40. Receiver tray: 45x30x1.5. Telemetry tray: 55x35x1.5. Airspeed sensor bracket: base 35x25x2, pitot support length 60, pitot hole dia 4. Keep all parts separate. STEP-compatible solids.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 10 mm | 5 – 50 |
| Length | 150 mm | 50 – 300 |
| Width | 45 mm | 20 – 100 |
| Thickness | 1.5 mm | 0.5 – 5 |
| Strap Slot Width | 20 mm | 10 – 30 |
| Length | 110 mm | 50 – 200 |
| Width | 70 mm | 30 – 150 |
| Thickness | 1.5 mm | 0.5 – 5 |
| Hole Diameter | 3 mm | 2 – 6 |
| Hole Margin | 5 mm | 2 – 15 |
| Side | 45 mm | 20 – 100 |
| Thickness | 2 mm | 0.5 – 5 |
| Mast Diameter | 8 mm | 4 – 20 |
| Mast Height | 40 mm | 10 – 100 |
| Length | 45 mm | 20 – 100 |
| Width | 30 mm | 20 – 80 |
| Thickness | 1.5 mm | 0.5 – 5 |
| Length | 55 mm | 20 – 100 |
| Width | 35 mm | 20 – 80 |
| Thickness | 1.5 mm | 0.5 – 5 |
| Base Length | 35 mm | 20 – 80 |
| Base Width | 25 mm | 15 – 50 |
| Base Thickness | 2 mm | 0.5 – 5 |
| Mast Diameter | 10 mm | 5 – 20 |
| Mast Height | 60 mm | 20 – 100 |
| Pitot Hole Diameter | 4 mm | 2 – 6 |
| Hole Offset from Top | 5 mm | 2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent