Everything else
UAV Case Waterproof Cable Pass-Through Assembly
- Bounding box
- 321.8 × 70.0 × 332.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- August 14, 2026
Download
Free to download and use. See the terms.
The prompt
Quiero que me diseñes un pasa cables para una maleta Groudcontrol de UAV, necesito pasar cables de la parte superior de la maleta donde van los monitores, a la parte inferior de la maleta, donde se encuentra el Pc y el teclado. Tiene que ser estanco para que no entre arena ni agua y cuando se cierre la maleta tiene que quedar plegado, el diámetro para pasar los cables interior tiene que ser de 20mm
Parameters
| Name | Value | Range |
|---|---|---|
| Bellows inner diameter | 20 mm | 10 – 40 |
| Bellows outer diameter | 35 mm | 20 – 60 |
| Bellows total length | 160 mm | 40 – 250 |
| Bellows corrugation valley OD | 26 mm | 15 – 34.5 |
| Bellows corrugation count | 10 count | 3 – 30 |
| Flange outer diameter | 70 mm | 40 – 120 |
| Flange thickness | 5 mm | 2 – 12 |
| Flange center hole diameter | 20 mm | 10 – 50 |
| Flange M4 clearance hole diameter | 4.5 mm | 3 – 8 |
| Flange bolt circle diameter | 50 mm | 30 – 60 |
| O-ring / gasket outer diameter | 70 mm | 40 – 100 |
| O-ring / gasket radial section | 2 mm | 1 – 4 |
| O-ring / gasket thickness | 2 mm | 1 – 4 |
| Screw thread diameter (M4) | 4 mm | 3 – 8 |
| Screw shank length | 12 mm | 6 – 30 |
| Screw head diameter | 7 mm | 5 – 12 |
| Screw head height | 4 mm | 2 – 8 |
| Washer outer diameter | 9 mm | 6 – 16 |
| Washer inner diameter | 4.2 mm | 3.5 – 8.5 |
| Washer thickness | 1 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like