Everything else
U-shaped hanging hook with pipe clamp
- Bounding box
- 96.5 × 52 × 92 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
raccorda le 2 forme e inserisci un fazzoletto triangolare di rinforzo anche nella parte bassa della staffa
Parameters
| Name | Value | Range |
|---|---|---|
| Recess width, object size | 50 mm | 20 – 150 |
| Recess height, object size | 50 mm | 20 – 150 |
| Bar / plate thickness, max 15 | 12 mm | 6 – 15 |
| Hook depth = wall plate width | 40 mm | 15 – 120 |
| Outer corner radius | 2.5 mm | 1 – 10 |
| Inner recess floor fillet | 2.5 mm | 0.5 – 8 |
| Screw hole diameter (M4 = 4.5) | 4.5 mm | 3 – 8 |
| Screw hole spacing across depth | 16 mm | 8 – 60 |
| Screw hole height above base | 40 mm | 10 – 120 |
| Vertical pipe diameter | 35 mm | 10 – 80 |
| Material between pipe groove and hook | 5 mm | 2 – 20 |
| Extra height of rear clamp above hook | 30 mm | 0 – 100 |
| Width of rear clamp along Y | 52 mm | 30 – 150 |
| Cable-tie slot width | 2.5 mm | 1.5 – 6 |
| Cable-tie slot height | 4 mm | 1 – 10 |
| Gap between pipe and tie slot | 1.5 mm | 0.5 – 5 |
| Tie slot centre height above base | 72 mm | 10 – 200 |
| Rear clamp edge rounding radius | 2.5 mm | 0.5 – 10 |
| Cove radius blending hook into rear clamp | 2.5 mm | 1 – 8 |
| Triangular rib reach in front of clamp | 16 mm | 5 – 60 |
| Triangular rib height above base | 16 mm | 5 – 60 |
| Triangular rib thickness | 3 mm | 1.5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm