U-Shaped Folded Sheet Metal Cover

Create a 3D sheet metal part based on the attached 2D technical drawing. The part is a U-shaped / folded sheet metal cover or bracket made from a flat sheet and formed by multiple 90-degree bends. Main dimensions: Overall front width: 180 mm Overall height: 160 mm The main folded section has a width of approximately 110 mm Top flange depth: 15 mm Sheet thickness: approximately 1.5 mm or as indicated in the drawing. All main bends are 90 degrees. Geometry: Start from the flat sheet-metal development shown in the drawing. Fold the sheet along the indicated bend lines to create the final 3D shape. The front/main panel is vertical. The top edge has a horizontal folded flange. The left and right sides have folded sections that form the stepped profile shown in Section A-A. The lower part includes horizontal mounting flanges extending outward from both sides. Add the two mounting holes on the lower flange as shown in the drawing. The bends should have realistic sheet-metal inside bend radii. Maintain the dimensions and proportions shown in the 2D drawing. Important: Use the Section A-A and Section B-B views to determine the exact folded geometry. Do not simply extrude the front view. The final model must be a single sheet-metal body created by bending a flat sheet, and the flat pattern should correspond to the development drawing shown at the bottom. The final result should look like the isometric view shown on the right side of the drawing.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.