Gears and transmission
Two-Stage Spur Gearbox Housing (10 kW, i = 20)
- Bounding box
- 389.0 × 142.0 × 210.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- October 25, 2026
Download
Free to download and use. See the terms.
The prompt
Design two stage spur gear box for transmitting 10kw . The motor speed is 1440 rpm and overall velocity ratio is 20
Parameters
| Name | Value | Range |
|---|---|---|
| Module (m) | 2 mm | 1 – 5 |
| Stage 1 Pinion Teeth (z1) | 18 teeth | 12 – 40 |
| Stage 1 Wheel Teeth (z2) | 81 teeth | 30 – 140 |
| Stage 2 Pinion Teeth (z3) | 18 teeth | 12 – 40 |
| Stage 2 Wheel Teeth (z4) | 80 teeth | 30 – 140 |
| Gear Face Width | 30 mm | 10 – 60 |
| Gear-to-Wall Clearance | 12 mm | 5 – 30 |
| Wall Thickness | 10 mm | 5 – 25 |
| Base / Sump Thickness | 12 mm | 5 – 30 |
| Cover Flange Width | 15 mm | 6 – 40 |
| Cover Flange Thickness | 12 mm | 5 – 30 |
| Input Shaft Bore | 25 mm | 10 – 50 |
| Intermediate Shaft Bore | 35 mm | 15 – 60 |
| Output Shaft Bore | 55 mm | 20 – 90 |
| Bearing Boss Radial Wall | 10 mm | 4 – 25 |
| Bearing Boss Height | 8 mm | 2 – 25 |
| Mounting Foot Overhang | 25 mm | 10 – 50 |
| Foot Bolt Hole Dia (M12) | 13 mm | 6 – 24 |
| Cover Bolt Hole Dia (M8) | 9 mm | 4 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled