Gears and transmission
Two-Stage Spur Gearbox
- Bounding box
- 106 × 50 × 34 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
i want a full gear box like in that image
Parameters
| Name | Value | Range |
|---|---|---|
| Gear module | 2 mm | 1 – 4 |
| Gear thickness | 8 mm | 4 – 16 |
| Input pinion teeth | 12 mm | 9 – 40 |
| Idler gear teeth | 20 mm | 12 – 60 |
| Idler pinion teeth | 12 mm | 9 – 40 |
| Output gear teeth | 20 mm | 12 – 60 |
| Wall thickness | 4 mm | 2 – 8 |
| Floor and lid thickness | 3 mm | 1.5 – 6 |
| Gear-to-wall clearance | 3 mm | 1 – 8 |
| Gear-to-lid clearance | 3 mm | 1 – 8 |
| Lid screw hole diameter | 3.4 mm | 2.5 – 6 |
| Shaft diameter | 6 mm | 4 – 12 |
| Bearing clearance | 0.4 mm | 0.1 – 1 |
| Shaft cap diameter | 12 mm | 8 – 24 |
| Shaft cap height | 5 mm | 3 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled