Gears and transmission
Two-Roller Gear-Driven Rolling Mechanism
- Bounding box
- 272.0 × 104.8 × 66.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
"Design a mechanical rolling mechanism with two parallel cylindrical rollers of length 100mm and diameter 25mm, connected by identical spur gears at one end, mounted on a flat base plate."
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Length (X) | 160 mm | 80 – 300 |
| Base Plate Width (Y) | 90 mm | 50 – 200 |
| Base Plate Thickness | 6 mm | 3 – 25 |
| Mounting Hole Dia | 6.5 mm | 3 – 12 |
| Bearing Plate Width (Y) | 90 mm | 40 – 200 |
| Bearing Plate Height (Z) | 60 mm | 30 – 150 |
| Bearing Plate Thickness (X) | 8 mm | 4 – 25 |
| Bearing Bore Dia | 25 mm | 10 – 45 |
| Roller Diameter | 25 mm | 10 – 60 |
| Roller Length Between Plates | 100 mm | 40 – 300 |
| Roller Center Distance | 50 mm | 30 – 200 |
| Rear Roller Overhang | 10 mm | 0 – 40 |
| Gear Teeth | 20 teeth | 8 – 60 |
| Gear Module | 2.5 mm | 1 – 6 |
| Gear Face Width | 10 mm | 4 – 30 |
| Gear Bore Dia | 25 mm | 5 – 45 |
| Second Gear Phase Offset | 9 deg | 0 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled