Brackets and mounts
Two‑Piece Wall Mount Bracket
- Bounding box
- 120.0 × 80.0 × 80.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric two-piece wall mounting bracket optimized for FDM 3D printing. General requirements: - Output as a parametric CAD model. - Exportable as STEP. - Two separate parts. Part 1 – Wall Mount: - Flat rectangular base plate. - Dimensions: 80 mm high × 40 mm wide × 8 mm thick. - Two countersunk mounting holes for 5 mm wood screws. - Hole center spacing: 60 mm. - Mounting holes centered on the width. - Add generous fillets (3–5 mm) on all outer edges. - Integrate two flexible locking hooks on the front side. - Hooks must withstand repeated engagement cycles. Part 2 – Insert Bracket: - Matching insert that slides vertically into the wall mount. - Securely locks into the hooks with an audible snap. - Easy installation without tools. - Release should require pressing two locking tabs simultaneously to prevent accidental removal. - Include lead-in chamfers to simplify insertion. Mechanical requirements: - Designed for PETG or ABS. - Static load capacity: at least 5 kg with a safety factor of 2. - Wall thickness: minimum 4 mm. - Reinforcing ribs where necessary. - Avoid unsupported overhangs greater than 45°. - Suitable for printing without support material. - 0.2 mm clearance between mating parts. - Reinforce all load-bearing areas. Printing requirements: - Optimized for 0.4 mm nozzle. - 0.2 mm layer height. - FDM printable. - Print orientation should maximize strength. Deliver: - Separate CAD bodies for both parts. - Fully parametric dimensions. - STEP export.
Parameters
| Name | Value | Range |
|---|---|---|
| Wall Mount Height | 80 mm | 40 – 200 |
| Wall Mount Width | 40 mm | 20 – 100 |
| Wall Mount Thickness | 8 mm | 3 – 20 |
| Hook Depth | 15 mm | 5 – 30 |
| Hook Thickness | 4 mm | 2 – 10 |
| Hook Lip Height | 5 mm | 2 – 10 |
| Hook Lip Thickness | 2 mm | 1 – 5 |
| Mount Hole Diameter | 5.5 mm | 3 – 10 |
| Mount Hole Spacing | 60 mm | 20 – 150 |
| Insert Body Height | 50 mm | 20 – 150 |
| Insert Body Width | 30 mm | 15 – 80 |
| Insert Body Depth | 20 mm | 5 – 50 |
| Arm Length | 25 mm | 10 – 50 |
| Arm Thickness | 3 mm | 1 – 8 |
| Arm Width | 20 mm | 5 – 50 |
| Tab Height | 3 mm | 1 – 10 |
| Tab Thickness | 2 mm | 0.5 – 5 |
| Layout Gap | 100 mm | 50 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and
