Brackets and mounts
Two-Part Lap-Joint Electronics Enclosure
- Bounding box
- 150.0 × 100.0 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric two-part electronics enclosure with a length of 150mm (x-axis), a width of 100mm (y-axis), and a total height of 40mm (z-axis). The uniform wall thickness for both parts must be exactly 2.5mm. Shape requirements: - The base profile must be a rectangle but the corners must smoothly taper in a convex curve along both the X and Y axes towards the outer corners. - All exterior edges and corners must be heavily filleted/rounded (radius 5mm) to fit ergonomically against the human body (thigh or stomach). Assembly & Split: - Split the enclosure horizontally into a Top Cover (Oberschale) and a Bottom Base (Unterschale). - The mating interface where they join together must be a stepped lap joint (tongue and groove / stepped profile) so they interlock flushly. Mounting Features: - Integrate two rectangular slots/passages (Durchführungen) on the left and right sides of the bottom base to slide a strap (velcro strap) through. The slots should accommodate a 40mm wide and 3mm thick strap.
Parameters
| Name | Value | Range |
|---|---|---|
| Length (X) | 150 mm | 80 – 250 |
| Width (Y) | 100 mm | 60 – 200 |
| Total Height (Z) | 40 mm | 30 – 80 |
| Split Plane (Base Height) | 20 mm | 10 – 50 |
| Uniform Wall Thickness | 2.5 mm | 1.5 – 5 |
| Corner Taper Radius | 15 mm | 5 – 40 |
| Exterior Edge Fillet (R) | 5 mm | 1 – 10 |
| Lap Joint Step Depth | 2 mm | 1 – 6 |
| Strap Passage Width | 40 mm | 20 – 70 |
| Strap Passage Clearance Height | 3 mm | 1 – 8 |
| Strap Passage Centre Height | 12 mm | 7 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent