Brackets and mounts
Two-Part Electronics Enclosure
- Bounding box
- 60.0 × 50.0 × 162.5 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- August 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create a two-part 3D-printable electronics enclosure consisting of a main body and removable lid. Internal dimensions: 150 mm high, 55 mm wide and 45 mm deep. Use 2.5 mm walls and rounded external corners. Add internal mounting rails for a vertical ESP32 board, a battery compartment, a DFPlayer Mini holder, a circular 33 mm speaker mount and a horizontal PN532 NFC reader compartment at the bottom. Use 0.5 mm clearance around removable electronic components.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Width | 60 mm | 50 – 120 |
| Body Depth | 50 mm | 40 – 100 |
| Body Height | 160 mm | 120 – 220 |
| Wall Thickness | 2.5 mm | 1.5 – 6 |
| Bottom Thickness | 10 mm | 2.5 – 20 |
| External Corner Radius | 5 mm | 1 – 10 |
| Internal Cavity Width | 55 mm | 40 – 100 |
| Internal Cavity Depth | 45 mm | 35 – 90 |
| Internal Cavity Height | 150 mm | 110 – 210 |
| Lid Thickness | 2.5 mm | 1.5 – 6 |
| Lid Retaining Lip Height | 3 mm | 1 – 8 |
| Lid Lip Total Clearance | 0.4 mm | 0.2 – 1.5 |
| ESP32 Rail Spacing | 29 mm | 22 – 40 |
| ESP32 Rail Width | 2 mm | 1 – 5 |
| ESP32 Rail Protrusion | 5 mm | 2 – 10 |
| ESP32 Rail Height | 140 mm | 80 – 150 |
| Battery Compartment Depth | 15 mm | 8 – 30 |
| Battery Compartment Partition Height | 70 mm | 30 – 120 |
| Battery Partition Thickness | 2 mm | 1.2 – 5 |
| DFPlayer Holder Opening Height | 21 mm | 15 – 30 |
| DFPlayer Holder Width | 22 mm | 15 – 35 |
| DFPlayer Rail Protrusion | 4 mm | 2 – 8 |
| DFPlayer Rail Thickness | 2 mm | 1 – 4 |
| DFPlayer Holder Bottom Clearance | 20 mm | 5 – 80 |
| Speaker Mount Diameter | 33 mm | 20 – 50 |
| Speaker Center Height from Floor | 100 mm | 40 – 150 |
| NFC Module Width | 43 mm | 30 – 50 |
| NFC Module Depth | 43 mm | 30 – 50 |
| NFC Module Height | 4 mm | 2 – 10 |
| NFC Component Clearance | 0.5 mm | 0.1 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent