Enclosures and housings
Two-Level Sliding Cutlery Organizer
- Bounding box
- 523.8 × 505.0 × 22.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a functional parametric 3D CAD model of a two-level sliding kitchen cutlery organizer. Overall size: 419 × 404 mm, target closed height about 20 mm. The lower tray stores forks, table knives and tablespoons. The upper tray is a shallow sliding tray for teaspoons and small utensils. The upper tray must slide horizontally on integrated 3D-printed rails inside the lower tray walls and must be captured with mechanical end stops. Design for FDM printing with a 0.4 mm nozzle: * 4 mm base * 1.6–2 mm walls * approximately 0.3 mm rail clearance per side * rounded corners * no metal hardware * avoid supports where possible Include 5–6 separated knife slots, approximately 200 mm long and 135–137 mm total width. Because the printer volume is 260 × 260 × 260 mm, divide the organizer into practical modular sections smaller than the printer volume. Make all major dimensions parametric and editable. Prioritize mechanical functionality, printability and strength over appearance. Generate a real solid CAD model, not a decorative mesh.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width | 419 mm | 200 – 600 |
| Overall Depth | 404 mm | 200 – 600 |
| Corner Radius | 5 mm | 0 – 20 |
| Lower Base Thickness | 4 mm | 2 – 10 |
| Lower Wall Thickness | 2 mm | 1 – 5 |
| Lower Wall Height | 12 mm | 6 – 30 |
| Rail Height | 2 mm | 1 – 6 |
| Rail Width | 3 mm | 1 – 10 |
| Rail Clearance | 0.3 mm | 0.1 – 1 |
| Upper Base Thickness | 4 mm | 2 – 8 |
| Upper Wall Thickness | 1.8 mm | 1 – 4 |
| Upper Wall Height | 8 mm | 4 – 20 |
| Upper Tray Depth | 136 mm | 80 – 200 |
| Upper Tray Y Start | 136 mm | 0 – 300 |
| Dovetail Depth | 5 mm | 2 – 15 |
| Dovetail Base Width | 4 mm | 2 – 10 |
| Dovetail Tip Width | 8 mm | 4 – 20 |
| Insert Length | 200 mm | 100 – 300 |
| Insert Width | 136 mm | 80 – 200 |
| Insert Thickness | 10 mm | 4 – 20 |
| Slot Count | 6 mm | 3 – 12 |
| Slot Width | 21 mm | 10 – 40 |
| Divider Width | 2 mm | 1 – 10 |
| Insert X Position | 5 mm | 0 – 100 |
| Insert Y Position | 0 mm | 0 – 200 |
| Insert Z Position | 4 mm | 0 – 20 |
| Slot Lead-in Radius | 2 mm | 0 – 10 |
| End Stop Height | 4 mm | 2 – 15 |
| End Stop Depth | 4 mm | 2 – 15 |
| End Stop Width | 3 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w