Twin MDF Laser-Cut Puzzle Board Set (Cafe + Social)

Create two separate laser-cut MDF puzzle boards, one for each scenario: the busy café ordering scenario and the social gathering scenario. Each board should measure 330 mm in length and 220 mm in width, with a total thickness of 6 mm using two 3 mm MDF layers. Each board should have three interconnected spaces designed to hold three puzzle pieces together in a sequence: one initial solution piece, one challenge piece, and one corresponding challenge-response piece. The three spaces should be arranged so that the pieces fit together and connect seamlessly, visually forming one continuous puzzle pathway. Each board should accommodate one selected piece from each category at a time, with enough clearance for the pieces to fit comfortably and be removed easily. For each scenario, create 25 puzzle pieces: five initial solution pieces, four challenge pieces, and sixteen challenge-response pieces, with four fixed responses corresponding to each challenge. This gives a total of 50 puzzle pieces across both scenarios. Each puzzle piece should measure approximately 82 mm in length and 54 mm in width, with a thickness of 3 mm and simple, recognisable jigsaw-style edges that allow the three selected pieces to interlock. Use soft, muted pastel colours throughout: soft pastel blue for the initial solution pieces, soft pastel yellow for the challenge pieces, and soft pastel green for the challenge-response pieces. Avoid bright, neon, or highly saturated shades, and keep the colours consistent across both scenarios while ensuring the three categories remain visually distinguishable. The boards and puzzle pieces should have clean, smooth edges and a simple design, with no engraved text, labels, numbers, or words.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.