Brackets and mounts
Turkey Sponge Holder with Feathers and Feet
- Bounding box
- 187.2 × 219.9 × 53.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- August 31, 2026
Download
Free to download and use. See the terms.
The prompt
Create a turkey-shaped frame around the existing round sponge holder. Do not cover, close, or place a solid plate across the circular sponge cavity. The 107 mm diameter sponge opening must remain completely open and visible from the front. Add a turkey-shaped decorative frame around the outside of the circular opening. The frame should form the turkey's head and body, while the circular opening remains the center of the design. Add a fan of 9 simple rounded turkey feathers behind and around the circular opening. The feathers should extend outward from the top and sides. Add two simple turkey feet at the bottom and connect them to a flat stable base. The turkey should be approximately 150 mm wide and 150 mm tall. Keep the existing 107 mm circular sponge opening and 43 mm depth unchanged. Do not add eyes, beak, or wattle yet. Do not create any solid surface across the sponge opening. Do not create floating parts. Keep the model simple, rounded, manifold, and suitable for FDM printing with PLA. Design it to print without supports whenever possible
Parameters
| Name | Value | Range |
|---|---|---|
| Sponge Cavity Diameter | 107 mm | 80 – 150 |
| Cavity Depth | 43 mm | 30 – 60 |
| Wall Thickness | 5 mm | 3 – 10 |
| Bottom Thickness | 5 mm | 3 – 10 |
| Drainage Hole Diameter | 5 mm | 3 – 10 |
| Drainage Holes Along X | 3 | 1 – 5 |
| Drainage Holes Along Y | 3 | 1 – 5 |
| Outer Bottom Fillet | 2 mm | 0 – 5 |
| Turkey Width | 150 mm | 120 – 200 |
| Turkey Height | 150 mm | 120 – 200 |
| Frame Thickness | 8 mm | 5 – 15 |
| Feather Count | 9 | 5 – 13 |
| Feather Length | 45 mm | 30 – 70 |
| Feather Width | 20 mm | 10 – 30 |
| Feather Thickness | 6 mm | 3 – 10 |
| Foot Width | 40 mm | 30 – 60 |
| Foot Length | 60 mm | 40 – 80 |
| Foot Thickness | 8 mm | 5 – 12 |
| Base Thickness | 5 mm | 3 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent