Brackets and mounts
Turkey Sponge Holder
- Bounding box
- 113.1 × 168.2 × 48.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- August 30, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing round sponge holder to make it look like the body and face of a cute Thanksgiving turkey. Keep the existing circular Scrub Daddy sponge cavity exactly 107 mm inside diameter and 43 mm deep. Do not block or reduce the cavity. Add a rounded turkey face around the front of the holder, approximately 110 mm wide. Give the face smooth rounded edges. The turkey face should cover the front portion of the holder while leaving the sponge cavity accessible from the top. Keep the bottom flat and stable. Keep all existing drainage holes. Make the new turkey body simple and suitable for FDM 3D printing without supports.
Parameters
| Name | Value | Range |
|---|---|---|
| Cavity Inside Diameter | 107 mm | 50 – 200 |
| Cavity Depth | 43 mm | 20 – 100 |
| Wall Thickness | 3 mm | 2 – 10 |
| Bottom Thickness | 3 mm | 2 – 10 |
| Drainage Hole Diameter | 5 mm | 2 – 10 |
| Hole Count X | 3 | 1 – 10 |
| Hole Count Y | 3 | 1 – 10 |
| Outer Bottom Fillet | 2 mm | 0 – 5 |
| Face Width | 110 mm | 80 – 150 |
| Face Height | 60 mm | 40 – 100 |
| Face Edge Radius | 8 mm | 2 – 20 |
| Beak Width | 12 mm | 5 – 20 |
| Beak Height | 10 mm | 5 – 20 |
| Wattle Width | 8 mm | 4 – 15 |
| Wattle Height | 12 mm | 5 – 20 |
| Eye Diameter | 6 mm | 3 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent