Brackets and mounts
Turkey Sponge Holder
- Bounding box
- 150.0 × 225.0 × 150.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- August 30, 2026
Download
Free to download and use. See the terms.
The prompt
Create a simple 3D-printable turkey-shaped sponge holder. The holder should contain a circular cavity for a standard Scrub Daddy sponge. Make the cavity 107 mm in diameter and 43 mm deep. Use 3 mm thick walls. Add a flat bottom with several 6 mm drainage holes. Create a wide stable base so the holder can stand upright on a kitchen counter. Make the turkey approximately 150 mm wide and 150 mm tall. Use simple rounded geometry and make it suitable for FDM 3D printing without supports.
Parameters
| Name | Value | Range |
|---|---|---|
| Cavity diameter | 107 mm | 90 – 130 |
| Cavity depth | 43 mm | 30 – 70 |
| Wall thickness | 3 mm | 2 – 6 |
| Bottom thickness | 3 mm | 2 – 6 |
| Drain hole diameter | 6 mm | 4 – 10 |
| Drain hole count | 5 | 3 – 9 |
| Drain pattern radius | 25 mm | 10 – 45 |
| Base diameter | 150 mm | 120 – 180 |
| Base height | 6 mm | 3 – 15 |
| Overall width | 150 mm | 130 – 200 |
| Overall height | 150 mm | 110 – 200 |
| Decorative depth | 100 mm | 60 – 130 |
| Edge fillet radius | 1 mm | 0.5 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent