Brackets and mounts
Triple Segway Truck-Bed Carrier Rack
- Bounding box
- 850.0 × 1200.0 × 383.0 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- October 4, 2026
Download
Free to download and use. See the terms.
The prompt
[OVERALL DIMENSIONS & BOUNDING BOX] - Total assembly width: 850 mm - Total assembly depth (length along the truck bed): 1200 mm - Maximum assembly height allowance: 480 mm [BASE FRAME STRUCTURE] - Create a rectangular base perimeter frame using 20x20 mm square aluminum tubing. - Frame dimensions: Width = 850 mm, Depth = 1200 mm. - Add three cross-member support beams (20x20 mm tubes) distributed evenly at Depth = 100 mm, Depth = 600 mm, and Depth = 1100 mm. [CENTER CHANNEL - FOR SEGWAY E3 PRO] - Position: Centered on the base frame (X-axis center line at X = 425 mm). - Component: Horizontal U-profile wheel channel. - Dimensions: Width = 160 mm, Height = 40 mm, Thickness = 2 mm. Length = 1200 mm. - Angle: 0 degrees (flat, parallel to the base frame). - Feature: At Depth = 0 mm, add a vertical end-stop plate (Width = 160 mm, Height = 100 mm, Thickness = 3 mm) acting as a front wheel chock. [LEFT CHANNEL - FOR SEGWAY E2] - Position: Located on the left side of the frame, starting at X = 50 mm. - Component: Tilted U-profile wheel channel. - Dimensions: Width = 120 mm, Height = 30 mm, Thickness = 2 mm. Length = 1200 mm. - Angle: Rotate the channel 45 degrees along the Y-axis (longitudinal axis), tilting OUTWARDS toward the left side of the bounding box. - Support: Create three triangular gusset support plates (Thickness = 3 mm) underneath this channel, welded to the base frame cross-members to hold the 45-degree angle rigidly. - Feature: At Depth = 0 mm, add a 45-degree tilted end-stop plate for the front wheel. [RIGHT CHANNEL - FOR SEGWAY E2] - Position: Located on the right side of the frame, starting at X = 680 mm. - Component: Tilted U-profile wheel channel. - Dimensions: Width = 120 mm, Height = 30 mm, Thickness = 2 mm. Length = 1200 mm. - Angle: Rotate the channel 45 degrees along the Y-axis (longitudinal axis), tilting OUTWARDS toward the right side of the bounding box. - Support: Create three triangular gusset support plates (Thickness = 3 mm) underneath this channel, welded to the base frame cross-members to hold the 45-degree angle rigidly. - Feature: At Depth = 0 mm, add a 45-degree tilted end-stop plate for the front wheel. [VERTICAL RETENTION RESTRAINTS] - For Left and Right channels: Add a vertical support mast (20x20 mm square tube) rising from the inner edge of the base frame at Depth = 400 mm. Height of mast = 350 mm. - At the top of each mast, include a generic circular clamp placeholder (Diameter = 40 mm) representing the handlebar stem locking mechanism. [ADDITIONAL SPECIFICATIONS]
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Width | 850 mm | 400 – 1500 |
| Frame Depth | 1200 mm | 500 – 2000 |
| Tube Size | 20 mm | 10 – 50 |
| Cross Member 1 Depth | 100 mm | 0 – 1200 |
| Cross Member 2 Depth | 600 mm | 0 – 1200 |
| Cross Member 3 Depth | 1100 mm | 0 – 1200 |
| Center Channel Width | 160 mm | 50 – 300 |
| Center Channel Height | 40 mm | 10 – 100 |
| Channel Wall Thickness | 2 mm | 1 – 10 |
| Channel Length | 1200 mm | 500 – 2000 |
| Center Channel X Center | 425 mm | 0 – 850 |
| End-Stop Plate Height | 100 mm | 20 – 300 |
| End-Stop Plate Thickness | 3 mm | 1 – 10 |
| Tilted Channel Width | 120 mm | 50 – 300 |
| Tilted Channel Height | 30 mm | 10 – 100 |
| Tilt Angle | 45 deg | 0 – 80 |
| Left Channel Start X | 50 mm | 0 – 850 |
| Right Channel Start X | 680 mm | 0 – 850 |
| Gusset Leg Size | 100 mm | 20 – 200 |
| Gusset Thickness | 3 mm | 1 – 10 |
| Mast Tube Size | 20 mm | 10 – 50 |
| Mast Height | 350 mm | 50 – 600 |
| Mast Depth | 400 mm | 0 – 1200 |
| Clamp Diameter | 40 mm | 10 – 100 |
| Clamp Thickness | 15 mm | 5 – 50 |
| Clamp Bore | 25 mm | 5 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu