Everything else
Trapezoid Profile
- Bounding box
- 902.0 × 150.0 × 82.0 mm
- Engine
- Precision B-rep
- Parameters
- 3
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 2D closed trapezoid profile on the XY plane. Use millimeters as the unit of measurement. Create exactly four vertices and four straight line segments. VERTICES: D = (0,0) A = (0,42) B = (820,68) C = (820,0) CONNECT THE VERTICES: A → B → C → D → A SIDE DEFINITIONS: AB = A to B BC = B to C CD = C to D DA = D to A GEOMETRIC REQUIREMENTS: DA must be vertical and lie on the Y-axis. CD must be horizontal and lie on the X-axis. BC must be vertical and parallel to DA. AB must connect A directly to B. The profile must be a single closed four-sided trapezoid. Do not create any additional geometry.
Parameters
| Name | Value | Range |
|---|---|---|
| Left Height (DA) | 42 mm | 1 – 200 |
| Right Height (BC) | 68 mm | 1 – 200 |
| Width (CD) | 820 mm | 10 – 2000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm