Everything else
Transparent Motorised 2-Axis Camera Module (assembled)
- Bounding box
- 74 × 73.6 × 58.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 41
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
can you atttach them togerhter still colour codded so i see how its stacks
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded spacing between parts | 70 mm | 45 – 150 |
| Exploded view (1=on, 0=assembled) | 0 mm | 0 – 1 |
| Base plate side | 50 mm | 30 – 120 |
| Base plate thickness | 3 mm | 2 – 10 |
| Host mounting hole dia | 2.4 mm | 1.6 – 6 |
| Host mounting hole spacing | 40 mm | 20 – 100 |
| Dome screw hole dia | 2.4 mm | 1.6 – 6 |
| Dome screw spacing on a side | 33 mm | 20 – 60 |
| Pan bearing ring outer dia | 40 mm | 20 – 80 |
| Pan bearing ring height | 5 mm | 2 – 15 |
| Pan bearing ring bore | 22 mm | 10 – 60 |
| Pan platform dia | 36 mm | 20 – 80 |
| Pan platform thickness | 4 mm | 2 – 12 |
| Pan gear tooth count | 24 mm | 8 – 60 |
| Pan motor body dia | 12 mm | 6 – 30 |
| Pan motor body length | 20 mm | 8 – 60 |
| Slip ring dia | 12 mm | 6 – 30 |
| Slip ring height | 8 mm | 3 – 30 |
| Yoke overall width | 34 mm | 20 – 80 |
| Yoke overall height | 30 mm | 15 – 80 |
| Yoke arm thickness | 4 mm | 2 – 10 |
| Yoke depth | 8 mm | 4 – 30 |
| Pivot shaft dia | 3 mm | 1.5 – 8 |
| Pivot shaft length | 8 mm | 3 – 25 |
| Pivot height above yoke base | 22 mm | 10 – 70 |
| Tilt motor body dia | 10 mm | 5 – 25 |
| Tilt motor body length | 16 mm | 6 – 50 |
| Camera carrier width | 24 mm | 10 – 60 |
| Camera carrier height | 18 mm | 10 – 60 |
| Camera carrier thickness | 5 mm | 2 – 15 |
| Camera board width | 22 mm | 8 – 50 |
| Camera board height | 16 mm | 8 – 50 |
| Camera board thickness | 4 mm | 2 – 12 |
| Dome diameter | 70 mm | 20 – 120 |
| Dome overall height | 55 mm | 20 – 120 |
| Dome wall thickness | 2 mm | 1.2 – 6 |
| Dome flange diameter | 74 mm | 20 – 130 |
| Dome flange thickness | 4 mm | 1 – 12 |
| Screw shank dia | 2 mm | 1.2 – 5 |
| Screw length | 6 mm | 3 – 20 |
| Gasket thickness | 0.5 mm | 0.2 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm