Everything else
Transmission Shaft
- Bounding box
- 52 × 52 × 380 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Genera un eje de transmisión con las siguientes características: - Longitud total: 380 mm - Configuración de diámetros de izquierda a derecha: - Extremo izquierdo (zona de sellado): diámetro 38 mm, longitud 35 mm - Apoyo de rodamiento izquierdo: diámetro 45 mm, longitud 28 mm, tolerancia h7 - Zona central (donde va el engranaje): diámetro 52 mm, longitud 180 mm, tolerancia h7 - Apoyo de rodamiento derecho: diámetro 45 mm, longitud 28 mm, tolerancia h7 - Extremo derecho (zona de sellado): diámetro 38 mm, longitud 35 mm - Distancia entre centros de los dos apoyos de rodamientos: 236 mm - Radios de redondeo: - Entre zona de sellado y apoyo de rodamiento: R2 mm - Entre apoyo de rodamiento y zona central: R3 mm - Chaveta en la zona central: - Ancho: 8 mm - Largo: 40 mm - Ubicada a 80 mm desde el centro del rodamiento izquierdo - Material: SAE 1045 - Acabado superficial: - Zona de rodamientos: Ra 1.6 - Zona de chaveta: Ra 3.2 Por favor, genera el modelo 3D o el dibujo 2D con todas las cotas y tolerancias indicadas.
Parameters
| Name | Value | Range |
|---|---|---|
| Total shaft length | 380 mm | 200 – 600 |
| Seal journal diameter | 38 mm | 20 – 60 |
| Bearing seat diameter | 45 mm | 25 – 70 |
| Center gear seat diameter | 52 mm | 30 – 80 |
| Bearing seat length | 28 mm | 10 – 50 |
| Distance between bearing centers | 236 mm | 100 – 400 |
| Keyway width | 8 mm | 4 – 20 |
| Keyway length | 40 mm | 10 – 80 |
| Keyway depth | 4 mm | 1 – 8 |
| Keyway offset from left bearing center | 80 mm | 20 – 150 |
| Seal-to-bearing fillet radius | 2 mm | 1 – 5 |
| Bearing-to-center fillet radius | 3 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
DC 24V DALI SLIM LED Sürücü Gövdesi (360 mm)
BU REFERANSA GÖRE REVİZE ET
