Everything else
Torque Lever with 1/4" Drive & 3/8" Ratchet Socket
- Bounding box
- 250.0 × 40.0 × 76.7 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
the handle needs to be much shorter, bit wider girthier too, the 3/8" bit needs to be 1/4" drive and have a slot the other side for a 3/8 ratchet to attach too
Parameters
| Name | Value | Range |
|---|---|---|
| Lever Arm Length | 250 mm | 120 – 400 |
| Lever Arm Width | 32 mm | 16 – 60 |
| Lever Arm Thickness | 8 mm | 4 – 16 |
| Drive Hole Dia | 10 mm | 5 – 20 |
| Drive Hole X | 25 mm | 10 – 60 |
| Adjusting Slot Width | 8.5 mm | 6 – 14 |
| Adjusting Slot Length | 70 mm | 20 – 120 |
| Slot Start X | 50 mm | 20 – 150 |
| Top Collar Dia | 20 mm | 12 – 32 |
| Top Collar Height | 12 mm | 6 – 24 |
| Press-Fit Shank Dia | 10.05 mm | 6 – 16 |
| 1/4" Square Drive A/F | 6.35 mm | 4 – 9 |
| Square Drive Projection | 10 mm | 4 – 20 |
| Ball Detent Dia | 3 mm | 1 – 6 |
| 3/8" Ratchet Socket A/F | 9.53 mm | 6 – 14 |
| Ratchet Socket Depth | 8 mm | 3 – 16 |
| Fulcrum Block X | 85 mm | 40 – 200 |
| Guide Slider Length | 14 mm | 8 – 30 |
| Guide Slider Width | 8.4 mm | 6 – 14 |
| Guide Slider Height | 4 mm | 2 – 8 |
| Load Base Length | 20 mm | 10 – 40 |
| Load Base Width | 16 mm | 10 – 32 |
| Load Base Height | 4 mm | 2 – 10 |
| Anchor Bolt Bore Dia | 8.2 mm | 4 – 14 |
| Handle Clamp X | 190 mm | 120 – 240 |
| Clamp Length | 26 mm | 14 – 50 |
| Clamp Width | 40 mm | 20 – 60 |
| Clamp Height | 12 mm | 8 – 24 |
| Handle Angle | 40 deg | 15 – 75 |
| Stem Dia | 14 mm | 8 – 24 |
| Stem Length | 18 mm | 8 – 60 |
| Grip Dia | 34 mm | 20 – 60 |
| Grip Length | 45 mm | 20 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm